4
Flip the jog lever (L) to select a letter
and press the lever to enter.
The selected letter stops flashing and
the cursor moves to the next input
position.
Press
To
X
Switch between
capital letters, small
letters, marks /
numbers, and
phrases.
VOL +/–
Move the cursor to the
left or right.
Jog lever
Change the letter to
(R) (./
the one before / next
>)
one.
END
Insert a blank space to
SEARCH/
type in a new letter
VOL +
pressing both buttons
together.
END
Delete a letter and
SEARCH/
move back all
VOL –
following letters to the
left pressing both
buttons together.
x
Cancel labeling.
1)
If phrases are stored in the phrase bank,
the first phrase stored appears in the
display (page 50).
5
Repeat step 4 and enter all characters
of the label name.
To cancel labeling, press x.
6
Press the jog lever (L) for 2 seconds
or more
.
The track or disc is labeled.
1)
Labeling a track during
playback
1
Insert a disc and play the track you
want to label.
2
Press the jog lever (L), flip the lever
until " EDIT" flashes in the display,
and then press the lever again.
"
: Name" flashes in the display.
3
Press the jog lever (L).
The track is ready to be labeled.
4
Follow steps 4 to 6 of " Labeling a
disc during stop" .
Labeling a track or a disc
during recording
1
While recording, press the jog lever
(L), flip the lever until " EDIT"
flashes in the display, and then press
the lever again.
"
: Name" flashes in the display.
2
To label a track, press the jog lever
(L) again.
To label a disc, flip the jog lever until
"
: Name" flashes in the display,
then press the lever.
The track or disc is ready to be
labeled.
3
Follow steps 4 to 6 of " Labeling a
disc during stop" .
To cancel labeling, press x.
Notes
• When the recording is stopped while labeling
a track or a disc during recording, or when the
playback moves on to the next track while
labeling a track, the input at that point is
entered automatically.
• " LP:" is automatically added at the beginning
of track names for tracks recorded in LP2 or
LP4 mode.
47
-GB