Key To Symbols; Symbols On The Machine; Symbols In The Operator's Manual - Husqvarna 439 Manual De Instrucciones

Symbols on the machine:

WARNING! Chainsaws can be
dangerous! Careless or improper use
can result in serious or fatal injury to
the operator or others.
Please read the operator's manual
carefully and make sure you understand
the instructions before using the
machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
Both of the operator's hands must be
used to operate the chainsaw.
Never operate a chainsaw holding it with
one hand only.
Never let the guide bar tip come in
contact with any object.
WARNING! Kickback may occur when
the nose or tip of the guide bar touches
an object, and cause a lightning fast
reverse reaction, kicking the guide bar
up and towards the operator. May
cause serious personal injury.
Chain brake, activated (right)
Chain brake, not activated
(left)
Choke lever in "open position".
Choke lever in "closed position".
Air purge
Refuelling.
2 – English

KEY TO SYMBOLS

Chain oil fill.
Adjustment of the oil pump
Recommen
ded cutting
equipment
in this
example: - Bar length 14 inches - Max. nose radius 9
Teeth - Chain type Husqvarna H37
Other approved bar and chain
combinations in Operator's Manual.
Measured maximum kickback value
with brake for the bar and chain
combination on the label.
Measured maximum kickback value
without triggering the brake, for the
bar and chain combination on the
label.
The rating plate showing
serial number. yyyy is the
production year, ww is the
productionweek.
Other symbols/decals on the machine r efer to
special certification requirements for certain
markets.
Symbols in the operator's
manual:
Switch off the engine by moving the
stop switch to the STOP position
before carrying out any checks or
maintenance. CAUTION! The start/
stop switch automatically returns to
run position. In order to prevent
unintentional starting, the spark plug cap must be
removed from the spark plug when assembling,
checking and/or performing maintenance.
Always wear approved protective
gloves .
Regular cleaning is required.
Visual check.
H37
9T
14"
XX
yyyywwxxxxx