Fagor 3IF-33B3S Manual De Instrucciones página 47

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

OPERATION
Switch off cooking zones
● A given cooking zone must be active. Heat setting display pulsates.
● To switch off a cooking zone touch the on/off sensor field or touch the sensor (3) for 3 sec-
onds. Slide your finger across the heat selection sensor field (2) to reduce the heat setting
to "0"
Switch off the appliance
● The appliance operates when at least one cooking zone is on.
● To switch off the appliance touch the on/off sensor (1).
If a cooking zone is still hot, the relevant display (3) will show the letter "H" to indicate residual
heat.
Booster function "P"
The Booster Function increases the nominal power of the Ø 210-220 mm cooking zone from
2000W to 3000W, 160-180 mm cooking zone - 1200W to 1400W, 290 mm cooking zone
2600W to 3700W.
In order to activate the Booster function, select the cooking zone and then using sensor (6) set
the heat setting to "P". The letter "P" will be shown on the display.
To switch off the Booster function, touch the heat setting selection sensor field (2) and reduce
the heat setting, or lift the pot from the cooking zone.
For 290 mm, 210-220 mm and 160-180 mm cooking zones, operation of the
Booster function is limited to 10 minutes. Once the Booster function is automati-
cally deactivated, the cooking zone continues to operate at its nominal power.
The Booster function can be reactivated, provided the appliance electronic
circuits and induction coils are not overheated.
When the pot is lifted from the cooking zone when the Booster function is in
operation, it remains active and the countdown continues.
When the appliance electronic circuits or induction coils overheat when the
Booster function is in operation, it is automatically deactivated. The cooking
zone continues to operate at its nominal power.
47

Capítulos

Tabla de contenido
loading

Tabla de contenido