Programming the hob
This section will show you how to program the hotplates. The
table contains power levels and cooking times for several
dishes.
Switching the hob on and off
The hob is turned on and off with the main switch.
To switch on: press the
#
main switch lights up. The hob is ready for use.
To switch off: press the
#
main switch disappears. All hotplates are off. The residual heat
indicator stays on until the hotplates have cooled down
completely.
Note: The hob switches off automatically when all the hotplates
are switched off for more than 20 seconds.
Set the hotplate
Select the required power level with the + and - symbols.
Power level 1 = minimum power.
Power level 9 = maximum power.
Each power level has an intermediate setting. This is marked
with a dot.
Cooking guidelines table
The table below contains some examples.
Melt
Chocolate, chocolate coating, butter, honey
Gelatine
Heating and warming
Stew (e.g., lentils)
Milk**
Sausages heated in water**
Defrosting and heating
Frozen spinach
Frozen goulash
Slow cooking, simmering
Potato dumplings
Fish
White sauces (e.g., bechamel)
Whipped sauces (e.g., Bearnaise, Hollandaise)
* Uncovered cooking
** Uncovered
26
symbol. The indicator above the
symbol until the indicator above the
Selecting the power level:
The hob must be switched on.
Press the + or - symbol of the desired hotplate. The
1.
lights up on the display.
Press the + or - symbol within the following 10 seconds. The
2.
basic setting will appear.
The + symbol = power level 9.
The - symbol = power level 4.
Changing the power level: Press the + or - symbol until the
3.
desired power level appears.
Turning off the hotplate
Press the + or - symbol until
and the residual heat indicator appears.
Note: If no pan has been placed on the induction hotplate, the
selected power level flashes. After a certain time, the hotplate
switches off.
Power level
1-1.
1-1.
1-2
1.-2.
3-4
2.-3.
2.-3.
4.-5.*
4-5*
1-2
3-4
‹
‹
appears. The hotplate turns off
symbol