Powerboost Function; To Activate; To Turn Off; Time Programming Function - Siemens EH6TA1 Serie Instrucciones De Uso

Powerboost function

The Powerboost function can be used to heat food more
quickly than using the power level
All the hotplates have this function.

To activate

The hob must be switched on, but no hotplate should be
working.
Select the required hotplate.
1.
Select the power level Š
2.
Then press the + symbol.
3.
The › symbol lights up in the display. The powerboost
function has been activated.

Time programming function

This function may be used in two different ways:
to automatically switch off a hotplate.
■
as a timer.
■

Switching a hotplate off automatically

Enter the cooking time for the desired hotplate. The hotplate will
switch off automatically once this time has elapsed.
How to program
Select the cooking power required.
1.
Press the symbol. The
0
2.
selected hotplate. In the time program function display
appears. To select another hotplate, press the
several times, until the
x
lights up.
Press the + or - symbol on the time program function. The
3.
basic setting appears:
+ symbol: 30 minutes.
- symbol: 10 minutes.

Press the + or - symbol until the required cooking time
4.
appears.
After a few seconds, the cooking time will start to count down.
28
Š .
.
indicator lights up on the
x
symbol
0
indicator of the required hotplate

Note: If any hotplate is switched on when the Powerboost
function is working,
the power level
be deactivated.

To turn off

Select the hotplate and press the - symbol. The
no longer be displayed and the hotplate will return to the power
level . The Powerboost function has been deactivated.
Š
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Once the time has elapsed
The hotplate switches off. The warning signal sounds, and the
in the time program function visual display
seconds. The
x
Pressing the
0
beep.
Changing or cancelling the time
Press the symbol several times until the required
0
indicator lights up. Change the cooking time using the + or -
symbols, or set to
Notes
If a cooking time has been programmed in several zones, it
‹‹
■
can be set to display all time values. To do this, press the
symbol several times until the
hotplate lights up.
Cooking times of up to 99 minutes can be programmed.
■

Automatic timer

With this function you may select a cooking time for all
hotplates. Once a hotplate is switched on, the selected time will
begin to count down. The hotplate will automatically switch off
when the cooking time has elapsed.
Instructions on activating the timer are found in the chapter
entitled "Basic settings".
Note: The cooking time of a zone may be cancelled or
changed:
Press the symbol several times until the required
0
indicator lights up. Change the cooking time using the + or -
symbols, or set to
› and Š will flash on the hotplate display;
will then be set. The Powerboost function will
Š
indicator lights up on the hotplate display.
symbol turns off the indicators and stops the
.
‹‹
indicator for the required
x
‹‹ .
› indicator will
appears for 10
‹‹
x
0
x