Vibe (Vibration) Mode; Slnt (Silent) Mode; Key Tone - Motorola TLKR T8 Manual Del Usuario

To select a Call tone:
1. Enter the MENU/GRP. Advance through the Menu until
the "RING" display. Press OK to select the ring tone from
(1-10).
2. Press the or key to select the desired ring tones.
Each tone will be heard every time you press the
selected ring tone number.
3. Press OK to confirm the setting.
To transmit the selected ring tone, press the
selected tone will automatically be transmitted for a fixed
length of time. Ring tone will be cancelled when the PTT
key is pressed.

Vibe (Vibration) mode

Your TLKR T8 is equipped with a Vibration selection that
will alert the user when there is incoming transmission or
call tone.
Vibrator mode is disabled for 30 seconds when you
transmit, receive or press any other button.
To turn the Vibrator mode ON:
1. Enter the MENU/GRP. Advance through the Menu until
the "VIBE" display. Press OK then press the
to set the Vibration to ON mode.
2. Press OK to confirm the setting.
To turn the Vibrator mode OFF:
1. Enter the MENU/GRP. Advance through the Menu until
"VIBE" display. Press OK then press the
set the Vibration OFF.
2. Press OK to confirm the setting.

Slnt (Silent) Mode

When you turn On the silent mode, all incoming calls are
muted; the radio blinks the backlight to alert you to an
incoming call. If you do not respond to the call, the backlight
turns Off, and the CALL icon will blink until there is no
signal.
Silent mode is disabled for 30 seconds when you transmit,
receive, or press any other button.
To turn the Silent ON:
/ key. The
1. Enter the MENU/GRP. Advance through the Menu until
the "SLNT" display. Press OK then press the
key to set the Silent to ON mode.
2. Press OK to confirm the setting.
To turn the Silent OFF:
1. Enter the MENU/GRP. Advance through the Menu until
"SLNT" display. Press OK then press the
set the Silent to OFF.
2. Press OK to confirm the setting.

Key Tone

Your radio emits a tone each time one of the keys (except
or key
for the PTT key) is pressed.
To turn the Key tone ON:
1. Enter the MENU/GRP. Advance through the Menu until
the "KEYS" display. Press OK then press the
key to set the Key Beep tone ON mode.
or key to
2. Press OK to confirm the setting.
To turn the Key tone OFF:
1. Enter the MENU/GRP. Advance through the Menu until
"KEYS" display. Press OK then press the
or
or key to
or
or key to
11