Microphone Gain; Hands Free Without Accessories (Ivox); Toggle Voice Prompt In User Mode; Power Up - Tone Mode - Motorola XT460 Guia Del Usuario

Default value is "3". iVOX can be set to any
value as listed below:
• 1 = High audio input levels trigger the Tx
• 2 = Medium sensitivity
• 3 = Low audio input levels trigger the Tx

Microphone Gain

The sensitivity of the microphone can be
adjusted to fit different users or operating
environments.
This feature can be adjusted using the
(Menu) button or the CPS. Microphone default
setting is set to level 2 (medium gain).

Hands Free without Accessories (iVOX)

• Press the PTT button while turning ON the radio
to enable iVOX. The icon
• iVOX can be temporarily disabled by pressing the
PTT button.
• A short press of the PTT Button re-enables iVOX.
28
English
Note:
•
•

Toggle Voice Prompt in User Mode

Short press the SB1 Button while turning ON
the radio to enable/disable the Voice Prompt in
User Mode. (Default is set to ON).

Power Up - Tone Mode

To enable/disable power up tone mode, press
SB1 and SB2 buttons simultaneously for 2-3
seconds while powering up the radio until you
hear a quick series of beeps and the power up
voice announcement programmed.
blinks.

Reset to Factory Defaults

Reset to Factory Defaults sets back all radio
features to the original factory default settings.
To do so, press PTT, SB2 and SB1
simultaneously while turning ON the radio until
you hear a high tone chirp.
There is a short delay between the time when you
start talking and when the radio transmits.
For more information on setting VOX/iVOX
sensitivity, refer to "Setting VOX /iVOX Sensitivity
– Menu" on page 29.