Set Id Name; Set Id Number; Set Monitor In Group Mode - Motorola TLKR T8 Manual Del Usuario

Set ID Name

ID name appears on other units' displays when you make
an All Call or Direct Call. This is also the name that appears
on other radio displays when someone wants to make a
Direct Call to you. When no ID name is set, the unit number
appears.
To set the ID Name:
1. Enter the MENU/GRP. Advance through the Menu until
"NAME" is displayed. Press OK to enter the Name on the
blinking sub-code segments.
2. Press the or
blinking sub code segments. Press OK to move to the
next character until completed the desired characters.
The name characters can be selected up to 4 characters.
3. Press OK to confirm the setting.
Note:Whenever the user presses MENU/GRP key, the
unit cancels input ID number and entered ID
name then it exits from Group menu.

Set ID number

Each radio in your group needs to be set to an ID number
from 1 to 16.
The ID number is required to distinguish units of the same
Group.
To set the ID number:
1. Enter the MENU/GRP. Advance through the Menu until
"ID" is displayed. Press OK then press the
to set the ID number.
2. Press OK to confirm the setting.
14
key to input the character on the
Note:The user selects ID number that is displayed on
channel segments by pressing the
When the registered ID of All Call is selected by
pressing
sub-code segments, and if non registered ID is
selected it indicates nothing at sub-code
segments.

Set Monitor in Group mode

To set the Monitor mode ON:
1. Enter the MENU/GRP. Advance through the Menu until
the "MON" display. Press OK then press the
key to set the Monitor to ON mode.
2. Channel monitoring will start immediately.
To set the Monitor to OFF:
1. Enter the MENU/GRP. Advance through the Menu until
"MON" display. Press OK then press the
set the Monitor to OFF.
2. Press OK to confirm the setting.
or key
or the LCD indicates "USED" at
or key.
or
or key to