Idiomas disponibles
Idiomas disponibles
English
Warning: don't put your hands under the Cappuccino Automatic, because the
overheated liquid may cause scalds.
13 – IMPORTANT DIRECTIONS
Place the machine on a stable and dry surface, away from heat sources and to the reach of
children.
Regularly check the level of water contained in the boiler through the glass level (5); the lack
of water when the machine is working may cause the heating element to burn out, even if the
machine is equipped with a safety thermostat.
When the machine is on, heats the water and produces steam, which remains compressed
inside the boiler. For safety reasons, it is recommended to take the machine out of reach of
children and not to touch hot parts such as the boiler (9), the unit (11) and the filter-holder
(10), to avoid burns and possible scalds.
Do not remove the filter-holder and do not absolutely put your hands under
the unit during the delivery, to avoid possible scalds.
Do not open the boiler cap (3) when the machine is working or still under
pressure, to avoid possible burns.
To screw the cap off and refill the boiler, place the switch (6) on the OFF position, slowly turn
the steam tap knob (4) anticlockwise to open it, and wait for all the steam contained in the
boiler to be discharged by the pipe provided (12); in case the steam does not come out pro-
perly, remove the filter-holder (10) and slowly lift the lever (1); hold the lever up to allow the
steam and water contained in the boiler to be discharged through the unit.
In both cases, it is advisable to use a container for steam and water collection, paying attention
since the steam and water discharged are overheated and may cause scalds. When the steam
and water stop discharging, unscrew the boiler cap slowly.
When the machine is off, during the process of cooling down, it may happen that the lever
moves upward by itself. This phenomenon is caused by the depression forming inside the
boiler itself.
If the machine is not used often, switch it off, placing the ON/OFF switch on the OFF position
and removing the main cable plug from the socket without pulling it.
60
The base-mat is fixed to the machine with a special Torx type screw, to avoid
tampering with electrical parts; therefore, for any type of intervention and in
case of replacement of the power supply cable, please refer to the authorised
SERVICE CENTRES.
14 – MAINTENANCE AND CLEANING OPERATIONS
Before conducting any kind of cleaning operation, unplug the main cable from the power
socket without pulling the cable.
Clean regularly the filter holder (10), the filter basket (16), and the perforated filter plate pla-
ced under the group (11) to avoid incrustations, and keep dry the drip tray (8) and the drain
well on the base to avoid water infiltration inside the base.
14.1 – STEAM TUBE CLEANING
To avoid altering the taste of the drinks to be heated and the clogging of the holes of the steam
pipe ending, clean carefully the steam pipe after every use.
14.2 –CAPPUCCINO AUTOMATIC CLEANING
Clean the Cappuccino Automatic after each use. Once in a while it should be cleaned more
accurately.
picture Q
English
After having slipped the device out of
its seat, as described in section 10,
remove the Cappuccino Automatic from
its metal support (18) by unscrewing the
ring nut (26), which should be turned anti-
clockwise, and removing the silicon tube
(20) from the suction tap (25), picture Q.
- Disconnect the spout-breaker (23) from
the milk-frother unit (24).
- Slip the milk suction tap (25) from the
milk-frother unit (24).
- Slip the regulation bar (19) out of the
tap (25).
Wash carefully everything under running
water and reassemble the components.
61
Capítulos
