Beurer BM 77 Manual De Instrucciones página 36

Measurement range Cuff pressure 0 – 300 mmHg,
systolic 30 – 260 mmHg,
diastolic 30 – 260 mmHg,
Pulse 40 –199 beats/minute
Display accuracy Systolic ± 3 mmHg, diastolic ± 3 mmHg,
pulse ± 5 % of the value shown
Measurement Max. permissible standard deviation
inaccuracy according to clinical testing:
systolic 8 mmHg /diastolic 8 mmHg
Memory 2 x 60 memory spaces
Dimensions L 175 mm x W 117 mm x H 50 mm
Weight Approx. 478 g (without batteries)
Cuff size 24 to 40 cm
Permissible operating +10 °C to + 40 °C, 15 % – 85 % relative
conditions air humidity (non-condensing)
Permissible storage - 10 °C to + 60 °C, 10 % – 90 % relative
and transport condi- air humidity, 700 –1013 hPa ambient
tions pressure
Power supply 4 x 1,5 V
Battery life For approx. 120 measurements, de-
pending on the blood pressure level
and/or pump pressure
Classification Internal supply, IP21, no AP or APG,
continuous operation, application part
type BF
AAA batteries
36
Data transfer via The blood pressure monitor uses
Bluetooth wireless Bluetooth
®
technology technology),
2402MHz – 2480MHz frequency band,
Transmission power max. 4.54 dBM,
Compatible with Bluetooth
phones/tablets
List of supported smartphones/tablets
The serial number is located on the device or in the battery
compartment.
Technical information is subject to change without notification
to allow for updates.
• This unit is in line with European Standard EN 60601-1-2 (in
accordance with CISPR 11, IEC61000-3-3, IEC61000-4-2,
IEC61000-4-3, IEC61000-4-4, IEC61000-4-5, IEC61000-4-6,
IEC61000-4-8, IEC61000-4-11) and is subject to particular
precautions with regard to electromagnetic compatibility
(EEC). Please note that portable and mobile HF communica-
tion systems may interfere with this unit.
• This device is in line with the EU Medical Devices Directive
93/42/EEC, the "Medizinproduktegesetz" (German Medical
Devices Act) and the standards EN 1060-1 (non-invasive
sphygmomanometers, Part 1: General requirements),
EN 1060-3 (non-invasive sphygmomanometers, Part 3:
Supplementary requirements for electro-mechanical blood
pressure measuring systems) and IEC 80601-2-30 (Medical
(Bluetooth low energy
® ®
4.0 smart-
®