Start-Up; Set Up; Opening Web Application Via Hotspot - Porsche 9Y0.915.686 Manual Del Usuario

Start-up

Start-up
When the power is on, the energy manager is on and
ready for operation:
Status On/Off lights up green.
To guarantee full functionality and reliable operation
of the energy manager, make sure that the latest
software is installed.
e
When you have started up the energy manager
for the first time, update the software via the
Web Application.
e
For information on performing software updates,
please refer to the
g Web Application Manual of the Porsche Home
Energy Manager
.
44

Set up

The energy manager is set up using a Web Appli-
cation. You can enter all the necessary values and
configure the current sensors in the Web Application.
Chargers with the EEBus protocol can be connected
to the energy manager as EEBus devices.
You can also retrieve information on the energy man-
ager in your Porsche ID account. For this purpose, the
energy manager must be linked with your Porsche ID.
e
For information on the Web Ap-
plication, see the manual at
https://www.porsche.com/international/about-
porsche/e-performance/help-and-contact/
If you require a different language, please select
the appropriate website for your country.
To set up the energy manager, make sure the follow-
ing essential information is made available to the
qualified electrician:
– Letter containing access data for logging into the
Web Application
– Access data for your home network
– Access data for the user profile (to link it with
your Porsche ID)
– Information on electricity tariffs/prices from the
contract with your electricity supplier
Opening Web Application via hot-
spot
You can open the Web Application on your device
(PC, tablet or smartphone) using a hotspot set up by
the energy manager.
e
To open the Web Application when a hotspot
is active, enter the following IP address in the
address line of your browser: 192.168.9.11
Information
− Depending on which browser you are using, the
Web Application may not open immediately. In-
stead, a notice regarding the browser's security
settings may be displayed first.
−
You may have to enter the network key to open
the Web Application. This depends on your devi-
ce's operating system.
Logging into Web Application
Two users are available for logging into the Web
Application: HOME USER and CUSTOMER SERVICE.
e
To set up the energy manager, log into the
Web Application of the energy manager as CUS-
TOMER SERVICE. You will find the initial pass-
words in the letter containing access data.
Fig. 28 Energy manager web application (OVERVIEW)
Power sources
A
Current flow
B
Current consumer
C
Energy
D