Tabla de contenido
Idiomas disponibles
Idiomas disponibles
5 TOOL USE
Recommended use of the product
Before using the tool, wear protective clothing and check that all safety and protection systems on the tool are func-
tioning and mounted properly.
•
Hold the tool firmly, in order to keep the active safety device pressed (13) and with your thumb press the releasing
switch (6).
•
Hold and drive the tool with the other hand on the handle upper area (29).
•
By keeping the operating lever (7) pressed, the tool gets started and the switch (6) can be released.
By releasing the operating lever (7), the releasing switch (6) gets automatically engaged and the tool stops.
•
Always cut making the chain (1) run at maximum speed.
•
Never cut with the upper part of the bar (2) tip.
•
Start cutting making the chain (1) run at full speed and keeping the bar (2) vertical.
•
Hook the tip of the bumper (30) and use it as a fulcrum.
•
Never cut trunks which are wider than the bar maximum length.
•
Use the tool only for the purposes described in par. "Product description". Any other use could cause inju-
ries.
•
Operate the tool only when it is inserted among the branches. Any improper use causes greater tool wear
and battery consumption.
Use and maintenance manual – Translation of
original Instruction.: 01, Date 24/11/2021
Page 37
Capítulos
Tabla de contenido
