Programming Pre-Set Buttons - Vitamix The Quiet One VM0145 Manual Del Usuario

C
O N T R O L
1 2
Speed Control Pre-Set Programmes
On/Of Power Switch: Located on the back of the motor base, the On/Of switch
controls the power to the machine. While plugged in, switch to on to ready the
machine for blending. Shut of the power switch at night or whenever the machine
will be left unattended.
Start/Stop Button: Pressing Start (
and turns the blade. Press Start/Stop button again to stop the machine and the blade.
Speed Buttons: Press the
button to gradually increase the speed of the blade in
increments of 1%, up to 100%. Press the
the blade in increments of 1%, down to 7%. Speed is used to set the blending speed of
the Pulse buttons and the Start/Stop button.
Pre-Set Programme Buttons: These buttons, numbered from 1 to 6, are pre-
programmed blending cycles designed for the most commonly made drinks.
Depending on the viscosity of the drink you are creating, pressing one of the six
Pre-Set programme buttons will run the machine for a full cycle. The machine will
stop automatically when the cycle is complete. A cycle varies in speed and length.
Each button can be reprogrammed to any recipe through custom programming or by
reprogramming to any of the 34 available recipes. Due to diference in recipes, your
results may vary.
Display Window: This area, depending on which button is pressed, displays a variety
of operation messages. A 'Ready' message appears when there is power going to the
machine.
Owner Controls: The control panel is accessible by activating the Power Switch
located on the back of the motor base while depressing button 2.
IMPORTANT NOTES!
Start/Stop Button: Pressing one of the Pre-Set programme buttons,
while the motor is running, will stop the machine.
Speed Button: These settings will reset if the power is shut of.
Pulse Buttons: The pulse provides a quick increase or decrease in the
speed of the blade when blending or refreshing a drink. Press
increase the motor to speeds that range from 51%-100%. Press
decrease the motor speed down to a range of 50%-7%. The Pulse button
will override the running programme as long as it is depressed. Once
released, the original programme will continue its cycle.
• The Pulse High ( ) and Low (
Speed buttons. To set, while pressing and holding a Pulse button,
press the Speed or button until the desired motor speed is
reached. The pulse speed will remain at this setting until changed
again with the Speed buttons.
All manuals and user guides at all-guides.com
P
A N E L
3 4
High/Low Pulse
)/Stop ( ) once starts and runs the machine
button to gradually decrease the speed of
to
to
) speed is set by using the
• Once the unit powers up, the display will cycle
through three screens. The irst indicates
the current programme version. The second
indicates which programme is running on the
machine. The third will indicate the motor
temperature (NORM, WARM, HOT), and the total
hours of operation, including production and
testing. This time can not be cleared. Once this
screen is reached, button 2 can be released.
• Depress button 2 within 12 seconds to scroll
through the menu settings.
• The irst press will reveal the timer. Total
operation is recorded in hours, minutes and
seconds; including production and testing. This time cannot be cleared.
• The second press will reveal the name of the programme controlling the Pre-Set
buttons. If you are using the Advance
PROGRAMME'.
• The third press will reveal an option to reset the Pre-Set buttons to the original
factory settings.
P
R O G R A M M I N G
The Quiet One® is pre-programmed with an Advance® programme which is optimised
for the Advance® container. The programme can be customised by using the control
panel, or a programming chip or the programmer software kit available from Vitamix®.
Call your distributor or customer services for more information.

Programming Pre-Set Buttons

1.
Access the 34 stored programmes by activating the power switch located on
the back of the motor base while depressing the High Pulse button. The display
will say 'BUTTON SET UP'
2. Press the Speed or buttons to scroll through the 'Recipe' numbers until
you reach the one you want. (For a description of each recipe, see page 6.)
3. Press the Pre-Set button that you want to programme for the recipe selected.
For Example: If you wanted to programme button 1 with recipe No. 17:
1. After accessing the stored programmes as
described in Step 1, the display window will say
'BUTTON SET-UP.'
2. Press the Speed button until the screen
displays 'Recipe 17'.
3. Press the 1 button to apply Recipe 17.
4. Either continue programming the other ive
buttons or press the High Pulse button to exit
and continue blending.
VITA-MIX CORP
VERSION NO. 201
TEMP COUNT
NORM 25
TIMER HR: MIN:
0: 10:
VITA-MIX ADVANCE
PROGRAMME NO. 201
1 TO OVERWRITE THE
CURRENT PROGRAMME
®
settings, this will read 'VITA-MIX ADVANCE
BUTTON SET-UP
RECIPE 1
BUTTON SET-UP
RECIPE 17
BUTTON SET-UP
RECIPE 17-------->1
READY
TOTAL
100
SS
33
5