Aluminium Processing; Accessories, Tools; Servicing And Maintenance; Warranty - Festool OF 2200 EB Manual De Instrucciones

Aluminium processing

The following precautions
are to be taken when processing alu-
minium for safety reasons:
• Pre-connect a residual current circuit-
breaker.
• Connect the machine to a suitable dust
extractor.
• Clean tool regularly of dust accumulations
in the motor housing.
• Wear protective goggles.

Accessories, tools

For safety reasons, only use
original Festool accessories and tools!
Festool offers you a comprehensive range of
accessories for your router:
• Routing tools for different applications.
• Guide rails for straight routing.
• Runner bases for different applications.
The accessory and tool order number can be
found in the Festool catalogue or on the In-
ternet under www.festool-usa.com.
Systainer
Many Festool products are shipped in a unique
system container, called "Systainer". This pro-
vides protection and storage for the tool and
accessories. The Systainers are stackable and
can be interlocked together. They also can be
interlocked atop Festool CT dust extractors.
– Place one systainer on top of the other.
– Release all four latches on the lower sys-
tainer by pulling back at their top edges
(21.1).
– Slide all four latches upward (21.2).
21.3
21.2
21.1
– Snap all four latches back to their fl at po-
sition (21.3) so they engage the stacking
tabs of the upper systainer.
Servicing and
maintenance
Any maintenance or repair
work that requires opening of the motor
or gear housing should only be carried
out by an authorised Customer Service
Centre (name supplied by your dealer)!
Maintenance or repair work carried out by an
unauthorised person can lead to the wrong
connection of the power leads or other com-
ponents, which in turn can lead to accidents
with serious consequences.
To prevent accidents, always
remove the plug from the power supply
socket before carrying out any mainte-
nance or repair work on the machine! Do
not use compressed air to clean the electri-
cal tool! Do not try to clean parts inside the
machine in this way, as you could let foreign
objects in through the openings of the ma-
chine housing.
Certain cleaning agents and
solvents are harmful to plastic parts.
Some of these are: gasoline, carbonyl chlo-
ride, cleaning solutions containing chlorine,
ammonia and household cleaners containing
ammonia.
• To assure the circulation of air, the cool air
vents in the motor housing must always be
kept clear and clean.
• This unit is fi tted with special, automati-
cally disconnecting carbon brushes. If these
become worn, the current is automatically
switched off and the unit shuts down. In
this case, take the unit to an authorised
Customer Service Centre and have the
carbon brushes changed.

Warranty

Conditions of 1+2 Warranty
You are entitled to a free extended warranty
(1 year + 2 years = 3 years) for your Festool
power tool. Festool shall be responsible for
all shipping costs during the fi rst year of the
warranty. During the second and third year of
15