Thermo King MD-200 MT Manual De Instalación página 4

This manual was written to assist with the installation of Thermo King
MD-200 MT Multi-Temperature truck condensing systems and
SPECTRUM™ S-2 remote evaporators onto truck bodies specifically
designed and built for refrigerated applications.
Due to its complexity, you should not attempt this installation unless you:
• Are an experienced mechanic.
• Can safely lift 34 kilos (75 lbs.).
• Are certified or trained in the repair and maintenance of diesel powered
refrigeration systems.
• Have a basic understanding of electricity and electrical wiring.
• Have the necessary tools and equipment to complete the installation.
This manual is published for informational purposes only. Thermo King makes no representations warranties express or implied, with respect to the
information recommendations and descriptions contained herein. Information provided should not be regarded as all-inclusive or covering all
contingencies. If further information is required, Thermo King Corporation Service Department should be consulted.
Thermo King's warranty shall not apply to any equipment which has been "so installed, maintained, repaired or altered as, in the manufacturer's
judgment, to affect its integrity."
Manufacturer shall have no liability to any person or entity for any personal injury, property damage or any other direct, indirect, special,
or consequential damages whatsoever, arising out of the use of this manual or any information, recommendations or descriptions
contained herein.
Introduction
Eng
iii