Stryker Prime TC Manual De Instrucciones página 7

• Always carefully transport the product over thresholds and small ledges to make sure that the wheels roll smoothly and
the product is stable.
• Always keep occupant extremities and operator extremities away from the flip-up armrest when raising the armrest or
lowering the armrest to avoid the risk of pinching.
• Do not operate the product on soft or unstable surfaces, such as sand, grass, or gravel, to avoid instability or difficult
mobility.
• Always use safe lifting techniques with two operators when lifting the empty product over a barrier. Lift the product by the
main frame tubes only. Do not lift the product by the armrests, footrests, accessories, or seating surfaces.
• The optional oxygen bottle holder is designed for type E class oxygen bottles only.
• Always make sure that you only attach foley bags to the optional foley bag hook.
• Always properly secure the IV bags to the hooks on the optional IV pole or the foley bags to the optional foley bag hook
before moving the product.
• Do not hang a foley bag over the safe working load of 10 lb (4.53 kg) on the optional foley bag hook.
• Always make sure that you only attach standard IV bags to the optional IV pole.
• Do not load the optional IV pole above the safe working load of 6 lb (2.72 kg) (3 lb (1.36 kg) per hook).
• Do not load the leg rest above the safe working load of 40 lb (18.14 kg).
• Do not steam clean the product.
• Always make sure that all labels are intact, brake pedal and go pedal lock properly in both positions, and check all
components for proper lubrication before you return the product to service after cleaning.
• Always make sure that you wipe each product with clean water and thoroughly dry each product after cleaning. Some
cleaning products are corrosive in nature and may cause damage to the product if you use them improperly. If you do
not properly rinse and dry the product, a corrosive residue may be left on the surface of the product that could cause
premature corrosion of critical components. Failure to follow these cleaning instructions may void your warranty.
1460-109-005 Rev D.1 3 EN