CA-850S_EBA.book Seite 37 Mittwoch, 8. September 2010 7:31 19
Technical data
6.3.6
Menu level 5: Temperature unit display
The system can display the room temperature in °C or °F. This parameter
can be configured:
➤ Start configuration mode (see Chapter "Starting and ending configu-
✓ The first digit of the display (fig. 7 on page 5, item 5) shows the menu
➤ Press the + (fig. 7 on page 5, item 6) four times to switch to menu
➤ Press the Operating Mode button (fig. 7 on page 5, item 4) to
✓ The digits in the display flash until the parameter you entered is con-
➤ Use the + and – buttons (fig. 7 on page 5, item 6 and 7) to select the
➤ Press the Operating Mode button (fig. 7 on page 5, item 4) to con-
✓ The set value is saved and is then used when the unit is restarted.
✓ You are now in menu level 5 again and can use the + and – buttons to
7
Technical data
Item number
Cooling capacity:
Rated input voltage:
Input voltage range:
Current consumption:
Low voltage shutdown:
Dimensions (L x B x H in mm)
(height above vehicle roof):
Weight:
Versions, technical modifications and delivery options reserved.
ration mode" on page 33).
level and the second and third show the parameter which can be set.
level 5.
change the parameters.
firmed.
temperature unit that the system should display.
firm your entry.
switch between menu levels.
Air conditioning roof unit
CoolAir CA850S
9100100027
850 W
24 V DC
20 V DC – 30 V DC
12 – 22 A
Configurable (see Chapter "Menu level 2: Low
voltage cut-off" on page 34)
635 x 830 x 179
approx. 21 kg
CoolAir
37