Consumables Changing Frequency; Cleaning - Ceasa NASSER LCD HF UF WBP 160 Manual De Instrucciones

12.1 Consumables changing frequency

For proper operation and long life of the softener set you should follow these
guidelines change consumables:
The existing resin into the resin tank must be replaced every 10 years life of the
equipment.
Salt for the regeneration of the resin must be reset as derived necessity of consumption,
so that the team never find without salt reservoir.

12.2 Cleaning

For proper operation and long life of the softener resins team is advised periodic
cleaning, the following guidelines:
Clean Filters (envelopes): This product performs an alkaline cleaning resin.
It must be provided 1 time per month, poured into the salt container fireplace.
With these preliminary cleaning and disinfection of the resins will get lengthen the life
of them, so that the rate of change of these corresponds to the 10 years referred to in
paragraph 12.1.
12.3 Extended stoppages
If the softener will be inoperative for a long time, it is recommended that the
following actions in order to preserve the equipment and its proper operation:
When you must leave the equipment out of service:
-
Disconnect the machine from the electrical outlet.
-
Cut off the water supply to the team, driving the external bypass is advised to mount
the installation (as recommended in paragraph 8.2).
When required again to operate the computer after a prolonged stoppage time:
-
Reopen the water supply equipment, operating the external bypass.
70 NASSER -
All manuals and user guides at all-guides.com
CEASA