Ceasa NASSER LCD HF UF WBP 160 Manual De Instrucciones página 51

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

This valve acts to intelligently Softening equipment (estimated capacity of soft water between
regenerations) and filtration mode regenerates days (programmable in Background)
Adjust parameters User (Foreground)
KEYBOARD L OCK i ndicator. With the activated indicator, the keypad is locked. Pressing a key does not
activate anything. (This function block is set to 1 minute, and lights up when the keyboard is locked).
Unlocking solution: Press and hold both ▼▲ for 5 seconds until the symbol goes off.
VALIDATION button. Press when the equipment is in service, and placed in settings mode.
Under the settings status, press and digits blink. In this position you can set the desired parameter by scrolling
Menu by pressing the ▼▲ keys.
After setting, press and return to the setup menu. The data is stored and a "beep" is heard confirmation.
REGENERATION button. Click on the service, and the system will enter in regeneration mode. (Example: If
water quality is not correct, unlock the keypad and press to start regeneration immediately. During each
regeneration cycle you can go forward by pressing this key).
Also press the REGENERATION for return to service, being in the state of adjustment programming.
Up and Down keys (▼▲). In the state of program settings, press ▼ or ▲ to display the parameters. Within
each parameter of the program, press to adjust values.
Press and hold both for 5 seconds to lock and unlock the keyboard.
Parameter setting (User mode)
Parameter
Time of day
Regeneration time
Water hardness
*For calculation of water hardness, use the following method: 1ºF (French degree)=10 mg/L CaCO3
You press and hold keys "validation" and "regeneration" for 5 seconds in state service and the system is placed in the language selection menu.
Screen process (User mode)
After connecting the unit to the mains, the following screen (indicating the model of the valve) is shown for 6 seconds and then will be placed in
USER mode.
All manuals and user guides at all-guides.com
Set Arrange
00:00~ 23:59
00:00~ 23:59
50~ 1500 mg/L
Factory Default
Actual value
Currenttime
2:00:00 am
400 mg/L
51
NASSER
-
CEASA
Tabla de contenido
loading

Este manual también es adecuado para:

Nasser lcd uf wbp 250Nasser lcd uf wbp 380Nasser led hf uf wbp 160Nasser led uf wbp 250Nasser led uf wbp 380Nasser pilotos led hf uf wbp 160 ... Mostrar todo

Tabla de contenido