Troubleshooting - Reer Neo 200 Manual De Uso

All manuals and user guides at all-guides.com
The status LED does not light up
Make sure that both units are switched on.

Check the connection of the mains adapter to the wall power socket and the unit.

Exchange the batteries and/or check the polarity.

Check the channel setting (A or B) of the transmitter and receiver.

The status LED flashes orange
The parent unit receives sounds. Turn up the volume on the parent unit to make sure

that you hear the sounds from your baby.
The status LED flashes red
The batteries are depleted. Replace the batteries or connect the unit to the power supply.

No sound transmission despite established connection
Check if the volume control button has been turned all the way down.

You can hear other wireless devices
As this baby monitor works with analogue radio technology, interference from other

wireless devices can occur. Change the channel.
A loud whistling tone sounds from the parent unit (feedback)
The baby unit is too close to the parent unit. Increase the distance between the baby

unit and the parent unit.
No connection between parent and baby unit / random noise / connection is lost
Make sure that both units are switched on.

Check the channel setting and/or change the channel.

The maximum range has been exceeded. Move the baby monitor to a different position

and/or reduce the distance between the baby and parent unit.
The baby/parent unit is close to interfering devices (e.g. microwave) or metal objects.

Try to find the source of interference and move the units to a different position.
The batteries are almost depleted. Replace the batteries or connect the units to the

power supply.

Troubleshooting

GB
19