Tips For Extending The Range; Pager Function / Tips / Cleaning And Maintenance . 25 Troubleshooting - Reer BeeConnect Plus Instrucciones De Uso

Tabla de contenido

Idiomas disponibles

PAGER

Press the search button

call signal and flashing control lights. To terminate the search function, press any key on the parent unit. The control

lights are turned off and the alarm is terminated.

ATTENTION: The search function can only be activated when both units are switched on and are within the range of

reception.

The reception range depends on the environment and other factors which may interfere with or block the trans-

mission signal:

• large metallic objects such as fridges, mirrors, wardrobes, metal doors and reinforced concrete

• fixed structures (walls) or radio, electrical and electronic appliances such as TVs, PCs, mobile phones or dimmer

switches

• the operation of devices which also work in the 2.4 GHz range such as wireless networks, WLAN routers, Blue-

tooth systems or microwaves

We recommend keeping a minimum distance of one metre between the baby unit and interfering

devices, or switching the latter off. In case of weak signal, we recommend moving the parent and/

or baby unit to a different place in the room.

Always disconnect the mains adapters from the wall power socket before

cleaning the unit. Only use a slightly dampened cloth. Do not submerge the

unit in water. Do not use chemical detergents.

Remove the batteries from the unit if it is not to be used for a long period

of time.

This product does not require any special maintenance. Repairs to the unit

must be carried out by skilled personnel only.

Problem

Possible cause

• The unit is not switched on.

The status LED does

not light up/ No display

• The mains adapter of the transmitter/recei-

indications

• The batteries are flat/incorrectly inserted.

• Power adapter is connected and the batte-

Status LED flashes green

when device is switched on

on the baby unit. After activating the key, the parent unit reports with an acoustic

ver is not (properly) connected or the power

socket is not working.

ries are charging in the unit.

Pager function