Troubleshooting - Reer BabyCam XL Instrucciones De Uso

Troubleshooting

Problem
No audio or video
signal is transmitted
Constant transmission
Constant range alarm
Unclear image or
image standstill or
sudden black and
white image
Possible cause
• Camera microphone
sensitivity is too
low
• No power supply to
the camera
• Camera microphone
sensitivity is too
high
• Continuous opera-
tion of the screen
is activated without
Auto off
• Camera is turned
off or power is not
supplied
• Distance between
the units is too
large
• The coupling is
faulty or no longer
there
• Range limit reached
• Brightness at came-
ra location too low,
camera switches to
night vision mode
• Interference from
other electronic
devices, e.g. WiFi
router, microwave...
Action
• Adjust the sensitivi-
ty in the menu
• Test the power sup-
ply
• Adjust the sensitivi-
ty in the menu
• Set a time limit for
continuous
tion or activate VOX
mode
• Switch on the
camera and test the
power supply
• Reduce distance
between units
• Carry out coupling
again
• Reduce distance
between units
• Adjust the bright-
ness sensitivity in
the menu or increa-
se the brightness at
the camera location
• Increase distance
to other electronic
devices, switch off
unused devices if
possible instead of
switching to stand-
by mode
opera-