T-Connector Wiring Kit
INSTALLATION INSTRUCTIONS
1. Read instructions thoroughly before beginning.
2. Open the rear hatch and
remove the plastic threshold
cover and cargo tray (Fig. 1).
Remove the wiring access
panels from each side to
reveal the vehicle wiring
harness (Fig 2).
3. On both the driver's and
passenger's side, locate
the vehicle wiring harness
connectors on the back of
the taillight housings behind
the access panels removed in
step 2. The harness will have
connectors similar to those
on the T-Connector harness.
Note: Be sure to use the Blue 3-pin connector, NOT
the Green 3-pin connector.
4. Beginning on the left (driver's) side, separate the vehicle
harness connectors, taking care not to damage the locking
tabs. Check the connector for dirt and debris and clean if
necessary.
5. Position the T-Connector ends with the Yellow wires
Fig. 1
Fig. 2
