T-Connector Wiring Kit
INSTALLATION INSTRUCTIONS
1. Read instructions thoroughly before beginning.
2. Locate the vehicles tail light wiring harness behind the rear
bumper. The harness will have connectors similar to those on
the T-Connector harness and can be found in the following
positions:
Passenger Cars:
Unscew the knob that retains the
left (drivers) side interior panel
of the trunk. Remove the left side
access panel to expose the vehicles
wiring harness.
Odyssey/Oasis Vans:
Remove the access panel on the
left (drivers) side interior trim panel
near the tail light housing.
Honda CR-V:
Carefully remove the lefft (drivers)
side rear speaker cover and remove
the three screws holding the rear
speaker in place. The vehicle wiring harness
connector will be attached to the speaker
wires.
3. Locate the vehicle harness connectors.
Untape the vehicle connectors, taking care
