Service And Adjustments; Tractor; To Remove Mower - TRAPP 42L13G60x8A Manual De Instrucciones

Warning!
To avoid severe injury, before performing any service or adjustment:
1. Depress clutch/brake pedal fully and set parking brake.
2. Place motion control lever in neutral (N) position.
3. Place attachment clutch in "disengaged" position.
4. Turn ignition key to "STOP" and remove it.
5. Make sure the blades and all moving parts have completely stopped.
6. Disconnect spark plug wire from spark plug and place wire where it cannot come in
contact with plug.

Tractor

To remove mower

Mower will be easier to remove from the right
side of tractor.
1. Place attachment clutch switch in
"disengaged" position.
2. Move attachment lift lever forward to lower
mower to its lowest position.
3. Roll belt off engine pulley.
4. Remove small retainer spring and then
remove clutch spring out of pulley bolt.
All manuals and user guides at all-guides.com

Service and Adjustments

5. Remove big retainer spring, slide collar
outward and push mower housing guide out
of bracket.
6. Disconnect anti-sway bar from chassis
bracket by removing retainer spring.
7. Disconnect suspension arms from rear deck
brackets by removing retainer springs.
8. Disconnect front links from deck by
removing retainer springs.
9. Raise lift lever to raise suspension arms.
Slide mower out from tractor.
105