Cleaning Air Screen; Muffler; Spark Plugs; Fuel Filter - TRAPP 42L13G60x8A Manual De Instrucciones

Cleaning air screen

Air screen must be kept free of dirt and chaff
to prevent engine damage from overheating.
Clean with a wire brush or compressed air to
remove dirt and stubborn dried gum fibers.

Muffler

Inspect and replace corroded muffler and
spark arrester (if equipped) as it could create
a fire hazard and/or damage.

Spark plugs

Replace spark plugs at the beginning of each
mowing season or after every 100 hours of
operation (whichever occurs first.) Spark plug
type and gap setting are shown in the
"Product specifications" section of this
manual.

Fuel filter

The fuel filter should be replaced once each
season. If it becomes clogged, obstructing
fuel flow to carburetor, replacement is
required.
1. With engine cool, remove filter and plug
fuel line sections.
2. Place new filter in position in fuel line
with arrow pointing towards carburetor.
104
All manuals and user guides at all-guides.com
3. Be sure there are no fuel line leaks and
4. Immediately wipe up any spilled gasoline.

Cleaning

✔
✔
✔
clamps are properly positioned.
Clean engine, battery, seat, finish, etc. of
all foreign matter.
Keep finished surfaces and wheels free of
all gasoline, oil, etc.
Protect painted surfaces with automotive-
type wax.
It is not recommended to use a garden
hose or pressure washer to clean your
tractor unless the engine and transmission
are covered to keep water out. Water in
engine or transmission will shorten the
useful life of your tractor. Use compressed
air or a leaf blower to remove grass,
leaves and trash from tractor and mower.