Stryker 0240-031-050 Manual Del Usuario página 22

Advanced Settings
Menu Item
Key Lock
Auto Source Select
Sleep Timer
OSD Control
Restore Factory Settings
Com Port
Converter power
Time Table
Information
Menu Item
User Name
Entry
Serial Number
Runtime
Input
Note: Actual on-screen display values may vary with updated version of the firmware and
user settings.
EN-18
Description
Key lock on: Disables all key functions (except Specialty and
Inputs selection)
Press and hold the rotary knob to turn off key lock.
Scans inputs until an active video source is detected.
Auto Source Select is disabled during PIP/POP/PBP mode.
On: The display enters sleep mode if no active video source is
detected.
Off : The display will not enter sleep mode.
Timer: Set the time until the display enters sleep mode: 30 or
60 minutes
Controls OSD (On Screen Display) Menu Position, Background,
and Timeout
Sets to factory default
Selects which port to use for communications.
Select SDC for SDC device control; select RS-232 for SPI router
control.
ON: Enables power to converter through HDMI port
OFF: Disables power to converter through HDMI port
Enable: Default signal detection and display output
Disable: Recommended for detecting signal in iSuite setups
Description
Enter custom name to be displayed in screen saver mode
Display device serial number
Display current device total run time
Display current input format