HURAKAN HKN A700TN Manual Del Usuario página 34

EN
Cleaning of h / a units from dirt and condenser
2
from dust
Inspection of the unit, electrical measurements
3 of network parameters, primary defect;
checking of automation devices setting
Check of reliability of fastening of knots,
4
tightening of fixing elements
Cleaning of electrical equipment and start-
5 protection equipment, checking the reliability
of electrical connections, their tightening
6 Checking automatic control devices
Check for refrigerant leakage, eliminate it if
7
necessary
Attention! When carrying out sanitary treatment, preventive and repair work, the product must
be disconnected from the network by removing the plug from the outlet, and the products are
removed from the cooled volume.
Attention! Do not wash the product under running water; accidental ingress of moisture on
electrical parts can disrupt the normal operation of the product and the electrical safety system.
6.11. When replacing the power cord, ensure that the yellow-green wire in the power cord is
connected to the grounding screw of the product on one side and to the ground terminal in the
mains plug.
6.12. It is strictly forbidden to move the product with a foot with twisted legs in the loaded state!
Attention! To move the product through the trade areas for a distance of more than 2 meters, use
trolleys with hydraulic lifting forks.
6.13. Preparation for maintenance (carried out by the staff of the operating organization)
includes: cleaning and washing the cabinet; ensuring free access of maintenance personnel to the
cabinet; preparation of necessary documentation.
The responsibility for preparing the equipment for the regulated maintenance is borne by the
manager of the enterprise where the equipment is installed.
7. TERMS OF WARRANTY
7.1. Warranty obligations are carried out for the free removal of plant defects, the objectivity of
which is recognized by the manufacturer or a specialized organization. Warranty obligations can
be carried out by a specialized organization that has an appropriate contract with the
manufacturer.
7.2. The warranty period for the product installed by the Supplier is 12 months from the date of
commissioning by the Buyer, but not more than 18 months from the date of sale by the
manufacturer.
7.3. Warranty is not provided if:
- all the transportation, storage, installation and operation rules specified in the technical
appliance certificate were not fully met;
- pre-commissioning activities, adjustment of devices of automation of the refrigerating
machine are executed by inadequate organization;
- there is no contract for technical maintenance of products by a specialized organization;
- repair work was carried out by staff not authorized to do so;
- the safety of factory seals on equipment or seals established by the Supplier has been
breached;
- consumables purchased not from the Supplier are used.
34
Owner company
weekly
mechanic
monthly Service center
monthly Service center
quarterly Service center
monthly Service center
monthly Service center