Multifunction Oven Control Panel - TATRA TPI 05 D.V Manual De Instrucciones

K1 Thermostat knob
K4 Timer knob
L1 Thermostat light
B2 Steam selector
 TIMER SELECTOR
When manual is selected, the oven stays on until someone turns it off.When a certain
value is selected, the oven stays on for that time (120 minutes maximum).
 THERMOSTAT SELECTOR
This knob allows selecting the desired cooking temperature.
 THERMOSTAT LIGHT
This light is on when the oven heating elements are on therefore the temperature in the
cooking chamber is less than that set by the thermostat dial. When the light goes off it
means that the heat is off and that the cooking chamber has reached the set
temperature.
 STEAM SELECTOR
This button enables humidifying for the length of time it stays pressed.

STEAM KNOB
This knob allows activating the moisturizing function and it can be regulated from
minimum to maximum in the clockwise direction.
WARNING: Satisfactory operation of the moisturizing function requires that the
temperature of the thermostat be set at least at 80-100°C.
Steam is not produced at low temperatures in the oven and the majority of water in the
oven flows into the drain.
Furthermore, good vapor cooking required preheating the oven to the desired
temperature before activating the vapor supply.
 SPEED ADJUSTMENT
The oven fan/motor has two speed levels. Press the button and enter the speed required:
 1 means that the motor is at its maximum speed. Used for most cooking methods.
 2 means that the motor is at its minimum speed. Used especially to cook delicate dishes,
such as pastries.
VIII. MULTIFUNCTION OVEN CONTROL PANEL
E n g l i s h | 14
B11 Speed regulation
K2 Steam knob
L2 Humidification light