Installation Instructions - V-TAC 80133970 Instrucciones De Instalación

ENGLISH

INSTALLATION INSTRUCTIONS

1. Jumper cap switching position has the functions of AC/DC (Maintained) and DC
(non-maintained). P1 is AC/DC position, P2 is DC position. (Refer to Picture F)
2. Take out the emergency lighting from the package carefully, open the light accord-
ing to the manual. LEAD wire to PCB AC and green terminal, sheathe the accessory to
emergency lighting. (Refer to Picture B)
3. Install the light on the wall according to the manual, the wire from green terminal be
plugged into the power supply of AC 220-240V.
OPERATION
1. If the AC power is normal, the green charging indicator is ON which shows the lamp
is charging.
2. If power failure occurs, the emergency light senses the AC power failure and
automatically switches to emergency mode. The emergency light will illuminate for a
minimum of 4 hours. When the AC power is restricted, the emergency light switched
the system back to normal mode and resumes battery charging.
MAINTENANCE
Use a small cotton swab with cleaning alcohol to clean the unit, never use strong or
volatile chemicals to clean the unit as it will damage the plastic parts.
F
P1 P2
Jumper Cap