Introduction & Warranty; Installation Diagram - V-TAC VT-12027 Instrucciones De Instalación

INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best.
Please read these instructions carefully before starting the installation and keep
this manual handy for future reference. If you have any another query, please
contact our dealer or local vendor from whom you have purchased the product.
They are trained and ready to serve you at the best. The warranty is valid for 2
years from the date of purchase. The warranty does not apply to damage caused
by incorrect installation or abnormal wear and tear. The company gives no war-
ranty against damage to any surface due to incorrect removal and installation of
the product. The products are suitable for 10-12 Hours Daily operation. Usage of
product for 24 Hours a day would void the warranty. This product is warranted for
manufacturing defects only.
NOTE: V-TAC LED Tube can be connected to both side of the batten fitting.

INSTALLATION DIAGRAM

NOTE: Compatible with V-TAC LED Tubes
1. Switch off the power
before starting the
installation
3. Fix the wire through the fitting.
5. Install the lamp holders as shown.
7. Fix the front cover of the
fitting.
EN T8 BATTEN FITTING
8. Insert LED Tube
2. Remove the front cover of the
fitting.
4. Install the fitting on the wall (Acces-
sories included).
6. Connect the wires as indicated
on the fitting.
9. Switch on
the power to
test the light.