Setup; Device Controls And Indicators; Storage, Handling And Removal Instructions; Storage And Handling - Stryker D850 Instrucciones De Uso

INSTRUCTIONS FOR USE
b. Make sure product has been properly cleaned and disinfected and wiped dry
prior to each use.

3.2 Setup:

a. Lower (or remove) the LEG SECTION of the table completely.
b. Unlock the Patient Transfer Board LOCK HANDLES by pulling them away from
the frame.
c. With the handles hanging toward the floor, insert the Patient Transfer Board
Locks into the x-ray cassette or "C" channels located just below the tabletop.
Make sure that the locks are seated in the channels (at least 6 inches).
d. Once the Patient Transfer Board is seated in the channels, securely lock the
Patient Transfer Board in place by pulling the LOCK HANDLES up until the
handles are parallel to the frame.
e. Ensure that the Patient Transfer Board is securely locked in place by attempting
to pull it out of the channels.
f. You can now transfer the patient to the table.

3.3 Device controls and indicators:

This Symbol specified this product must be used only for patient legs.

3.4 Storage, Handling and Removal Instructions:

3.4.1 Storage and Handling:

The product should be stored in a clean and safe environment to prevent product
damage. See storage Specifications under Product Specification section.
Document Number: 80028253
Version: B
Page 12
Lock securely
in place
Issue Date: 24 MAR 2020
Ref Blank Template: 80025118 Ver. E