Sterilization Instruction; Cleaning And Disinfection Instruction - Stryker D850 Instrucciones De Uso

INSTRUCTIONS FOR USE
Material
Safe Working Load on the device
Overall Weight of Complete Device
Storage Specifications
Storage temperature
Storage Relative humidity range
Operating temperature
Operating Relative humidity range
Electrical Specifications
Not Applicable.
Software Specifications
Not Applicable.
Compatibility Specifications
The Patient Transfer Board is
compatible with:
Note: Consult the corresponding IFU for the products mentioned in the above table.

4.3 Sterilization Instruction:

This device is not intended to be sterilized. Equipment damage may occur.

4.4 Cleaning and Disinfection Instruction:

WARNING:
 Do not use bleach or products that contain bleach to clean the device. Injury or
equipment damage can occur.
 After each use, clean the device with alcohol-based wipes.
 Do not put the device into water. Equipment damage can occur.
 Use a cloth and a quaternary ammonium disinfecting/cleaning solution to clean
and disinfect the device.
 Read and follow the manufacturer's recommendation for low-level disinfection.
 Read and follow the cleaning product's instructions. Use caution in areas where
liquid can get into the mechanism.
 Wipe the device with a clean, dry cloth.
 Make sure that the device is dry before you store it or use it again.
CAUTION: DO NOT IMMERSE PADS IN ANY LIQUID
Document Number: 80028253
Version: B
Viscoelastic Foam, Vinyl-Nitrile Rubber.
Polyurethane Foam, Lectrolite Fusion 3,
Lectrolite Duotone, Black
300 lbs. patient (136 kg)
18.5 lbs (8.3 kg)
Description
-29ᵒ C to +60ᵒ C
15% to 85%
This device is intended to be used in a controlled
Operating Room environment.
Description
Not Applicable.
Description
Not Applicable.
Description
BERCHTOLD B850 Table.
Page 14
Issue Date: 24 MAR 2020
Ref Blank Template: 80025118 Ver. E