Setup And Connection - Stryker Formula Manual Del Usuario

Setup and Connection

Before setting up the handpiece, ensure the console and footswitch have
been set up properly. See the Total Performance System (TPS), Crossfire™,
or Consolidated Operating Room Equipment (CORE) user guide for console
setup instructions. See the TPS, Crossfire™, and iSwitch® footswitch user guide
for footswitch setup instructions.
English Only
TPS
5100-001-709
CORE
5400-050-700
Crossfire™
1000-401-036
iSwitch®
1000-400-700
Setup Summary
To set up the handpiece, perform the following steps:
1. Connect handpiece to the shaver console.
2. Install and remove shaver blade into/from the handpiece.
3. Connect suction tubing to the handpiece.
Connecting the Handpiece to the Shaver Console
1. Align the red dot on the cable connector with the red dot on the console
cable ports.
2. Gently push the cable connector into the port, as shown below. It will lock
in place (See Figure 2). (To disconnect the cable, grasp the cable connector
and pull back on the connector collar.)
Figure 2: Crossfire™ console
EN-10
Español
Deutsch
Français
Italiano Svenska
Nederlands Português
5100-001-712 5100-001-733
(does not
include
5400-050-716 5400-050-734 5400-050-754 5400-050-724
Dansk Polski
Suomi Ελληνικά
Norsk
5100-001-750 5100-001-720
Norsk)
P11344
1000-400-700
日本語
中文简体
한국어
(does not
include
한국어)