Alarm Input; Alarm Output - Samsung SHR-1041 Manual Del Usuario

hdd event
.
In the <system setup> window, use the direction
buttons ($%_+/ENTER) to select <event/sensor>.
. Select <hdd event> and use the up/down buttons
($%/ ENTER) to set a desired item.
disK FuLL event : You can set to notify the user when
•
the HDD is full.
- This is applied only if you have set <overwrite> in
<disK management> to <oFF>.
. When your settings are completed, click <appLy> on the
bottom.
Your settings will be applied.

aLarm input

. In the <system setup> window, use the direction buttons ($%_+/ENTER) to select <event/
sensor>.
. Select <aLarm input> and use the direction buttons
($%_+/ENTER) to set a desired item.
operation : Set the connection status of the alarm
•
sensor to either ENABLE or DISABLE.
- If the alarm sensor is set to <enaBLe> and you have
set to perform recording if an alarm occurs, the Live
screen displays the alarm recording standby mode.
(Page 18)
- The INPUT type of the alarm is N/O(Normal Open).
. When your settings are completed, click <appLy> on the
bottom.
Your settings will be applied.

aLarm output

. In the <system setup> window, use the direction
buttons ($%_+/ENTER) to select <event/sensor>.
. Select <aLarm output> and use the direction buttons
($%_+/ENTER) to select and set a desired item.
operation : Set the operation of the alarm output.
•
- If set to <enaBLe>, the applicable menu is activated
where you can set other options.
- If set to <disaBLe>, other items will be disabled.
mode : Set the output mode of the alarm.
•
- If set to <Latched>, the alarm will sound for as much
time as defi ned in DURATION.
- If set to <transparent>, the DURATION item will be disabled.
• hdd event : Set to use the alarm output if the HDD is full.
duration : Set the duration of the alarm output.
•
- If you select <until>, the buzzer will be stopped when you press any button on the front panel or the
remote control.
aLarm, video Loss, motion : Set the alarm output for each channel if an event of alarm, video
•
loss or motion detection occurs.
. When your settings are completed, click <appLy> on the bottom.
Your settings will be applied.
CAM1 CAM1
EVENT/SENSOR
HDD
DISK FULL EVENT
EVENT
ALARM
INPUT
ALARM
OUTPUT
CAM1 CAM1
BUZZER
OUTPUT
E-MAIL
NOTIFICATION
CAM1 CAM1
EVENT/SENSOR
HDD
OPERATION
EVENT
1 DISABLE
ALARM 2 DISABLE
INPUT
3 DISABLE
4 DISABLE
ALARM
OUTPUT
CAM1 CAM1
BUZZER
OUTPUT
E-MAIL
NOTIFICATION
CAM1 CAM1
EVENT/SENSOR
HDD
OPERATION DISABLE HDD EVENT
EVENT
MODE LATCHED DURATION
ALARM
INPUT
ALARM VIDEO LOSS
ALARM
OUTPUT
1
2
CAM1 CAM1
BUZZER
3
OUTPUT
4
E-MAIL
NOTIFICATION
ON
APPLY UNDO
APPLY UNDO
ON
5 SEC
MOTION
APPLY UNDO
English _