Ddns Setting - Samsung SHR-1041 Manual Del Usuario

settings
Line type
Public IP
Private IP
.
When your settings are completed, click <appLy> on the bottom.
Your settings will be applied.
•

ddns setting

if the dvr is connected directly to the internet
1 Move to "system"  "networK".
2 Set DHCP and DDNS Enabled.
3 Restart the system.
Move to "system management" 
4
"system inFormation".
5 Check the DDNS Domain Name.
6
7
8
9
If you are using a remote access program, you can enter the set's Domain Name including the last 6
bytes of the MAC Address instead of the IP address.
10
- If the MAC address is "00-11-5F-00-00-01", the domain name will be "http://f000001.websamsung.net".
- The domain name of the appropriate set is included in the system information.
_ settings
connection mode
Static IP
Dynamic IP
Dynamic IP
Static IP (Internal)
modem
ddns setting router
Not defined
Defined
Defined
Defined
If the DVR is connected via the router
Set DHCP Disabled and DDNS Enabled.
When the system restarts, move to "system" 
"networK".
Check the IP address.
If you are not sure about the IP, contact your
network administrator.
(Example of the private IP: 192.168.10.113)
Check the DDNS Domain Name.
Restart the system.
You should connect to the router and configure
the router settings of Port Forwarding or DMZ
Server.
(DVR connection port port 6100 & 80)
You should set the static IP of the DVR in
accordance with port 6100 & 80 of the router.
port Forwarding
X X
X X
O O
X O