Color Setup; Motion Sensor - Samsung SHR-1041 Manual Del Usuario

coLor setup

.
In the <system setup> window, use the direction
buttons ($%_+/ENTER) to select <camera>.
. Select <coLor setup> and use the direction buttons
($%_+/ENTER) to select a desired item.
. If you select an item of which you want to change the
setting, you will see coLor setup screen.
You can adjust all settings from 0 to 100 for each channel in fi ne
tune mode, and the default is 50.
channeL : Select a channel of which you want to set
•
the color.
Brightness : Adjusts the brightness of the monitor.
•
• contrast : Adjusts the contrast of the monitor.
tint : Adjusts the luminance of the monitor.
•
coLor : Adjusts the display color of the monitor.
•
. When your settings are completed, click <appLy> on the
bottom.
Your settings will be applied.

motion sensor

This menu is enabled only if you have set the motion recording
in "record setup".
. In the <system setup> window, use the left/right
buttons (_+) to select <camera>.
. Select <motion sensor> and use the direction buttons
($%_+/ ENTER) to set a desired item.
sensitivity : Set the sensitivity of motion detection.
•
You can adjust the sensitivity level from 1 to 10.
area : Select an area of motion to detect.
•
CAM1 CAM1
CAMERA
CAMERA
TITLE
BRIGHTNESS CONTRAST
1 50 50
COLOR
2 50 50
SETUP
3 50 50
4 50 50
MOTION
SENSOR
CAM1 CAM1
CAM1
CHANNEL BRIGHTNESS CONTRAST TINT
1 50 50 50
CAM1 CAM1
CAMERA
CAMERA
TITLE
SENSITIVITY
1 5 AREA
COLOR
2 5 AREA
SETUP
3 5 AREA
4 5 AREA
MOTION
SENSOR
CAM1 CAM1
TINT COLOR
50 50
50 50
50 50
50 50
APPLY UNDO
COLOR
50
APPLY UNDO
English _