Warning / Mounting Of Replacement Parts - TEUFELBERGER pulleySAVER Manual Del Usuario

WARNING / MOUNTING OF REPLACEMENT PARTS

At the end of the climb, it is necessary to hold the thin line when retrieving the pulleySAVER in
order to control its' rate of descent!
WARNING
Components and sections of the pulleySAVER assembly coloured red are not rated for
fall protection.
Note the presence of red stitching on the Stopper and the Stopper Flap. Neither may be used
for fall protection.
Note the red Spacer on the Prusik Loop between the attachment holes of the Pulley. The red
spacer is not an anchor point and may not be used for fall protection!
MOUNTING OF REPLACEMENT PARTS
For replacement, it is imperative that you use only the replacement part approved by the
manufacturer. Before using the equipment again, be sure to verify that the spare part has been
replaced correctly. If you lack the experience, skills, and knowledge that are necessary for this
job, please consult a compentent person or the manufacturer.
SIRIUS LOOP 10MM P-S (OR P-L) AND OD LOOP 7MM T
fig. 23
fig. 26
fig. 24
fig. 27
fig. 25
fig. 28
15