Transport, Storage And Cleaning - TEUFELBERGER pulleySAVER Manual Del Usuario

TRANSPORT, STORAGE & CLEANING
TRANSPORT, STORAGE & CLEANING
Note: For transportation, storage and cleaning parameters also consult the specific user in-
structions for all hardware that is part of the pulleySAVER.
The textile pieces of the pulleySaver consist of polyester, aramide and Dyneema
Aramide and Dyneema
its strength to decrease. In the event of reactions such as discoloration or hardening, retire the
product for safety reasons. Furthermore, Dyneema
above 60°C.
The thimble consists of 17-4 PH stainless steel that has been heat treated and electropolished.
Do not sure this product in corrosive conditions.
When transporting the product, it must always be protected form light and dirt and provided
with suitable packaging (moisture-repellent material that is impervious to light).
Conditions of storage:
Protected from light (UV radiation, welding
�
machines ...)
Dry and clean
�
At room temperature (15 - 25 °C)
�
Not in the proximity of chemicals (acids, lyes, liquids, vapours, gases, ...) and other aggres-
�
sive environments
Protected against sharp-edged objects
�
Therefore, store the product dry and ventilated in a moisture-repellent bag that is impervious to
light.
For cleaning, use lukewarm water and – if available – a rope detergent in accordance with the
cleaning instructions provided thereon. Do not use a textile detergent. Following cleaning, rinse
the product with plenty of clear water.
In any event, prior to storage or use, allow the product to dry completely in a natural way and
not in direct sunlight, or near fires or other heat sources.
For disinfection, use only such substances that do not have an impact on the synthetic ma-
terials used. Do not disinfect the product more often than is absolutely necessary! We recom-
mend the use of isopropyl alcohol 70%. Apply the disinfectant to the surface for about 3 mi-
nutes and allow the product to dry naturally. Be sure to observe the safety instructions for the
use of the disinfectant.
If you fail to observe these provisions, you will be putting yourself into danger!
18
are not UV-stable. Sun and chemicals attack the material and cause
®
must never be exposed to temperatures
®
.
®