Maintenance / Service Life / Declaration Of Conformity - TEUFELBERGER pulleySAVER Manual Del Usuario

REGULAR CHECKS / MAINTENANCE / SERVICE LIFE
Written Inspection Record Sheet - pulleySAVER
Date Inspection
type '(p, w,
t, e)
*Inspection types: p = pre-use check, w = weekly inspection, t = thorough inspection, e = exceptional circumstances
Such inspections must at least comprise the following:
Check of general state: age, completeness, soiling, correct assembly
�
Check of label: Does it exist? Is it legible? Is there a CE marking? Does it specify the year
�
of manufacture?
Check of all individual parts for mechanical damage such as: cuts, cracks, indentations,
�
abrasion, formation of ribs, kinks, crushing.
Check of al individual parts for thermal or chemical damage such as: fusing, hardening.
�
Check of metal components for corrosion and deformations.
�
Check of condition and completeness of end connections, stitching (e.g. no abrasion of
�
sewing thread), splices (e.g. no slippage), knots.
Again, the following rule applies: If there is only the slightest doubt, the product needs to
be retired or subjected to testing by a competent person.
MAINTENANCE
Repairs may be carried out only by the manufacturer.
SERVICE LIFE
Note: For maintenance, lifespan and obsolescence also consult the specific user instructions
for all hardware that is part of the pulleySAVER.
Friction Hitch cord (Sirius and Ocean Dyneema
signs of wear. Expect to replace friction hitch cord regularly. Regular monitoring is essential
e.g. pre-use checks, weekly inspections, thorough examinations (consult national legislation for
interval) and after exceptional circumstances.
The product's service life of the Prusik Loop with thimble may be up to 2 years from the day
20
Findings and
actions (Defects,
repairs, etc.)
Accept, Next
Reject or inspection
Correct? date
) are consumable wear parts. Expect to see
®
Name and Signa-
ture of competent
person