Striker Recess For Mortise Locks; Striker Shapes For The Top And Bottom Locking Of The Passive Leaf - G-U BKS SECURY 19 Instrucciones De Instalación

EN 1125 | EN 179 | EN 12209 | EN 14846
General installation instruction
1.5
Series 13; B-18; B-19;
B-21; B-23 (door frame)
- according to EN 179
(t = min. 1.5 mm)
- according to EN 1125
(t = min. 3 mm)
1.6
Striker for top-locking
Floor striker for bottom
locking
Fig. 3: Approved striker shapes
EN
16

Striker recess for mortise locks

All undimensioned radii R = 1.5 mm
Series 1201
- according to EN 179
(t = min. 1.5 mm)
- according to EN 1125
(t = min. 1.5 mm)
14.5
14
12
1.5
12.25
14

Striker shapes for the top and bottom locking of the passive leaf

Recess for centered
faceplate
17
14
17
14
EN 1125
with lip
or
07.2020 | 23553S | Designed in Germany
Series B-1125x
14
These strikers
should be
equipped with
a lip in the latch
area.
(see drawing)
EN 179
without lip
or