Placing In Operation; Functional Check Of The Multi-Point Locks; Secury 2170 / 2171 - G-U SECURY 21 S Serie Instrucciones De Montaje

Installation instructions
SECURY 21 EK | 21 S
Multi-point locks electrically couplable or with monitoring contacts
4.
4.1
ATTENTION
CAUTION
NOTE

4.1.1 SECURY 2170 / 2171

„ „ Make sure that the power supply to the multi-point lock exists.
„ „
Make sure that the multi-point lock is electrically decoupled (operating
voltage off).
Check whether all latchbolts are completely pulled back when the inside
lever handle is actuated (panic function).
„ „ Release the lever handle so that it returns to its initial position.
Check whether the three latchbolts are run out automatically and com-
pletely through pressing on the trigger lever.
Only for SECURY 2170 S (Multi-point lock for 1-leaf doors):
Make sure that all three latchbolts are completely extended.
DE
52

Placing in operation

Functional check of the multi-point locks

Always carry out a function check before using the
door for the first time!
If the multi-point lock is not installed properly, the
door might no longer open.
Squeezing of body parts!
Do not reach between door and frame!
Latchbolt in
initial position
EN FR ES
Trigger
lever
08.2013 | G27856 | Printed in Germany
Latchbolt
extended