Installation Advice - G-U BKS SECURY 19 Instrucciones De Instalación

EN 1125 | EN 179 | EN 12209 | EN 14846
General installation instruction
„ Observe the installation, maintenance and
operating instructions. It is particularly
important to ensure that all keepers and
covers are fully installed.
„ Operators of such an exit device must be
instructed about use as intended.
„ Attach a clearly visible pictograph indicating
operation of the handle to the inside of
the door or in the escape direction directly
above the door hardware, or on the hardware
itself if it has a sufficiently large flat area to
accommodate the lettering.
„ All statutory regulations in relation to use of
the exit device on fire and smoke protection
doors remain fully valid.
1.2
„ To install GU multi-point locks, use the
appropriate GU factory drawing.
„ After all drilling and milling work, blow out
the profiles with compressed air so that the
profile is free of chips.
„ Make sure the spindle is free of tension and
sits exactly on its axle.
„ Make sure that the locking cylinder has an
exact seat to avoid possible sluggishness
during operation.
„ Observe the specified clearance (permissible tolerance of ±1 mm).
„ Make sure that the reference points of the strikers/latch&deadbolt striker and multi-point lock specified on
the factory drawing all lie at precisely the same height.
„ Make sure that the fixing screws of the door hardware are not improperly tightened (i.e., too tightly) and
that the door hardware is properly positioned to avoid malfunctions of the multi-point lock.
„ The tension rods must always be able to move freely behind the faceplate of the multi-point lock. For this
reason:
Ž use fixing screws that are not too large.
Ž avoid screwing in the fixing screws at a cant.
Ž prevent hardware parts from becoming jammed.
Ž maintain a clearance to electrical cables.
„ Using a clearance packer, for example, make sure that the leaf cannot be moved in relation to the frame from
transport to installation of the door. This prevents damage to the locking points, for example.
„ Make sure that the latchbolts are not triggered or already extended when the door is open.
„ In addition, observe the pictographs on the last page of these instructions.
EN
14

Installation advice

max. 1500 mm
max. 300 kg
Fig. 2: Max. door dimensions and weights
07.2020 | 23553S | Designed in Germany
max. 1500 mm
max. 300 kg