Allmatic BIOS2 24V Manual Del Usuario página 37

Cuadro de mando para cancelas a hoja 24v
Ocultar thumbs Ver también para BIOS2 24V:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 74
7.2 - ADVANCED SETTINGS OF THE STROKE
Connect to the MOTOR 1 output the wing which beats. Install an
aventual electrical lock on this wing. MOTOR 1 is always activated first
during opening phase and in second during closing phase.
Carry out a check of the menus and, if needed, customize the settings before
1.
the learning of the stroke.
Be sure to have set the item menu LSI = P. The slowdowns should be set
during the learning procedure and the amplitudes will be independent in the
two directions.
The second wing delay will be those set in the menu (default: dLY = 2).
Unlock the automation and move it to the middle of the stroke.
2.
Press at the same time the "UP" and "MENU" buttons for at least 5 seconds
until the display shows LOP.
If the MOTOR 1 DOESN'T MOVE in opening, press the "DOWN" button to stop
3.
the learning. The display shows L--.
Press the "SS" button to restart the procedure: the MOTOR 1 moves in
opening, at reduced speed.
Reached the opening mechanical stop, the motor stops automatically.
4.
WARNING - if the motor doesn't stop automatically, press the "SS"
button.
In this phase the display shows LOP.
If the MOTOR 2 DOESN'T MOVE in opening, press the "DOWN" button to stop
5.
the learning. The display shows L--.
Press the "SS" button to restart the procedure: the MOTOR 2 moves in
opening, at reduced speed.
Reached the opening mechanical stop, the motor stops automatically.
6.
WARNING - if the motor doesn't stop automatically, press the "SS"
button.
In this phase the display shows LOP.
The MOTOR 2 moves automatically in closing, at running speed.
When the automation reaches the position for the beginning of the slowdown,
7.
give a Step-by-Step command (SS).
In this phase the display shows LCL.
The MOTOR 2 proceeds at slowdown speed.
Reached the closing mechanical stop, the motor stops automatically.
WARNING - if the motor doesn't stop automatically, press the "SS"
8.
button.
In this phase the display shows LCL.
6-1622420
rev.5
ITA
14/09/2021
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
UP
ENG
FRA
ESP
TUR
UP



DOWN
MENU
DOWN
5 seconds

MENU

SS
DOWN
MENU
SS

SS
DOWN
MENU
DOWN

MENU

SS
DOWN
MENU
SS


DOWN
SS
MENU
DOWN


MENU

SS
DOWN
MENU
SS
DOWN

MENU

SS
DOWN
MENU
SS


SS
DOWN
MENU

DOWN
MENU
SS
DOWN

MENU
SS

DOWN
SS
MENU

DOWN
MENU
SS

DOWN
MENU
SS

SS
DOWN
MENU


SS
UP
DOWN
MENU

SS
UP
DOWN
MENU
DOWN
MENU
SS

SS
NLD
UP
DOWN
MENU
DOWN
MENU


13/24

Tabla de contenido
loading

Tabla de contenido