Tabla de contenido
Idiomas disponibles
Idiomas disponibles
The MOTOR 2 moves automatically in closing, at running speed.
Reached the closing mechanical stop, the motor stops automatically.
WARNING - if the motor doesn't stop automatically, press the "SS"
7.
button.
In this phase the display shows LCL.
The MOTOR 1 moves automatically in closing, at running speed.
Reached the closing mechanical stop, the motor stops automatically.
8.
WARNING - if the motor doesn't stop automatically, press the "SS"
button.
In this phase the display shows LCL.
The MOTOR 1 moves automatically in opening, at running speed.
Reached the opening mechanical stop, the motor stops automatically.
WARNING - if the motor doesn't stop automatically, press the "SS"
9.
button.
In this phase the display shows LOP.
The MOTOR 2 moves automatically in opening, at running speed.
Reached the opening mechanical stop, the motor stops automatically.
10.
WARNING - if the motor doesn't stop automatically, press the "SS"
button.
In this phase the display shows LOP.
The automation moves in closing with the second wing delay set into the menu
11.
dLY and with the slowdowns set into the menu LSI.
WARNING - in the event of a safety device intervention, the learning is stopped and will appear on the display
Press the "SS" button to start again the learning from the 4th point.
NOTE - if the motors don't stop automatically during the learning, increase the value of the obstacle sensitivity and /or the obstacle sensitivity during
slowdowns (menu SEN and SEL), see paragraph 8, and check that the intervention mode of the current sensor is suitable for the use as limit switch
(menu Sn.M.), see paragraph 9.
12/24
ITA
ENG
FRA
ESP
UP
DOWN
MENU
SS
UP
DOWN
MENU
UP
DOWN
SS
MENU
UP
DOWN
MENU
SS
UP
DOWN
SS
MENU
UP
DOWN
MENU
UP
DOWN
SS
MENU
UP
DOWN
SS
MENU
SS
UP
DOWN
MENU
SS
UP
DOWN
MENU
SS
UP
DOWN
SS
MENU
SS
UP
DOWN
MENU
SS
UP
DOWN
MENU
SS
UP
DOWN
MENU
SS
UP
DOWN
MENU
SS
TUR
NLD
6-1622420
L--
.
rev.5
14/09/2021
Tabla de contenido
