Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3 - PRODUCT DESCRIPTION
The control unit BIOS2 24V is suitable for the installations of 2 motor with direct current 24V and a maximum absorption of
easy and intuitive functioning thanks to the display interface and 4 buttons. The control unit allows a precise regulation of all parameters. The control
unit can memorize up to 1000 transmitters (external memory) with the step by step, partial opening, open and close functions. It is supplied with inputs
for opening and closing photocells, safety edge (mechanical or resistive) and buttons for step by step, partial opening, open, close and stop. The outputs
include a 24 Vac flashing light, 24Vac courtesy light/open automation light, 24 Vdc accessories power supply and an electrical lock 12 Vac 15 VA. The
electrical lock is also available with the expansion card R1 (not supplied) with dry contact 230 Vac 5A max/30 Vdc 5A max.
Buffer batteries use is available in case it would be necessary to ensure the temporary service in case of lack of power.
26
26
FM2
RELAY 4
1
1
FUSE 1
3.1 - MAIN COMPONENTS / CONNECTIONS
1.
Fuse 1: T 10A fuse for motor protection.
2.
Connection for motors.
3.
Fuse 2: T 10A fuse for motor protection.
4.
Connection for 24Vdc accessories.
5.
Connection for 24Vac accessories (flashing
/ open automation
light).
6.
Connection for electrical lock 12Vac
7.
Connection for 24Vdc photocells power supply.
8.
Connection for command and safety devices.
9.
Signaling Led for the inputs state.
10. DIP-SWITCH for safety devices.
11. Connection for antenna.
12. Connector for Bluetooth module.
13. Connector for external memory.
6-1622420
rev.5
25
25
FM1
RELAY 5
RELAY 6
RELAY 7
1
2
3
4
M1
M2
FUSE 2
2
2
3
3
light,
courtesy light
15VA.
ITA
14/09/2021
24
21
24
21
POWER
22
ON
22
18
18
17
17
J5
16
16
EXPANSION
CARD
23
23
J1
RELAY 1
RELAY 2
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20 21
OPEN GATE
ELECTRICAL
24VDC
FLASH
GND
LIGHT
LOCK
+24VDC
4
4
5
5
6
6
7
7
14. Connector for radio module.
15. DOWN (-) button.
16. Step-by-Step (SS) button.
17. MENU button.
18. UP (+) button.
19. Signaling Led for the radio signal.
20. Display.
21. Led for the presence of the power supply.
22. Connector for
23. Connector for optional R1 card.
24. Fuse 2: F200mA fuse for 24Vdc protection.
25. Fuse 3: T 2,5A fuse for 24Vac outputs protection.
26. Connection for transformer.
ENG
FRA
ESP
10A. This device has an
20
20
RADIO
DISPLAY
UP
DOWN
MENU
SS
J4
J3
26 27
12
12
9
9
ON
DIP-SWITCH
EDGE
PH2
PH1
STOP
OPEN CLOSE PED SS COM
22 23 24
+24VDC
EDGE
PH2
PH1
STOP
OPEN CLOSE PED SS COM
TX PHOTO
8
8
the batteries charger card (24CBA).
TUR
NLD
19
19
15
15
14
14
13
13
11
11
10
10
25
FIG. 1
FIG. 1
3/24
Tabla de contenido
