HOLZMANN MASCHINEN TS315F1600 Instrucciones De Servicio página 41

1
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
7.1. Adjustment of sliding table
 The distance between the sliding table and
the saw blade is adjusted with the screw
(4).
 Permissible distance: 3 - 11 mm.
7.2. Assembly sliding table supports
 Two sliding table supports are included in
the delivery content. These are mounted on
the left and right sides of the sliding car-
riage (5).
Proceed as follows:
 Loosen the 2 screws (7) by which the mounting plate (6) is fixed to the sliding
table support.
 Now insert the fixing plate (6) into T-slot of
the sliding carriage (5).
 Retighten the 2 screws (7).
NOTE: To ensure that the swivel arm (8) is
not blocked by the sliding table support, a
distance of 165 mm between the machine and
the sliding table support must be maintained.
NOTE: The support feet (9) allow you to align
the height of the sliding table with the work
table. To do that, level the edge of the sliding
table with the edge of the main table (level
wood piece / spirit level).
8. Assembly components on sliding table
8.1. Assembly sliding table handle
The handle which serves to move the sliding
table is assembled as follows:
 Loosen the slot stone (1) until it can be
inserted into the T-slot of the sliding table.
 Then retighten the slot stone (1) by turning
the handle.
ASSEMBLY
41
TS315F1600