Orbit ST2-RF Manual Del Usuario página 10

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

duration to 0 minutes, and a setting of 10% will decrease a
10 minute duration to 1 minute.
• Exit the set water budgeting mode by turning the selection
dial.
Test All Stations:
With the "TEST ALL" function, you can easily test all the water-
ing stations by turning them on in sequence for one minute
each.
• With the dial in the
AUTO
button.
• The display reads "TEST ALL" to the right of the letters "A"
and "B."
• Press the
ENTER
Each watering station will turn on for one minute, in sequence.
To abort this process before the test is finished, press the
CLEAR
C
button. To advance quickly from one station to
the next press
NEXT
cally exit the "TEST ALL" mode after all stations have run for
one minute.
Manual Watering - All Stations:
With the "MANUAL ALL" function, you can manually turn on
the watering stations at any time.
• With the dial in the
AUTO
button.
07WTM002598 57926-24 rA.indd 9
position press the
MANUAL
button.
. Otherwise, the timer will automati-
position press the
MANUAL
• Press the
NEXT
button.
• The display reads "MANUAL ALL" to the right of the letters
"A" and "B."
• Press the
ENTER
button.
Each station with a set duration will water in sequence. To
quickly advance from one station to the next press
To abort this process before the manual watering is finished,
press
CLEAR
C
. Otherwise, the timer will automatically exit
the "MANUAL ALL" mode after all stations have run.
Manual Watering - Program A:
This will allow you to water only those stations with set dura-
tions in Program A.
• With the dial in the
AUTO
position press the
button.
• Press the
NEXT
button until the display reads
"A MANUAL ALL".
• Press the
ENTER
button.
Each station will water, in sequence, one after another, for the
same duration specified in Program A. To quickly advance from
one station to the next press
NEXT
To abort this process before the manual watering is finished,
press
CLEAR
C
. Otherwise, the timer will automatically
exit the "A – MANUAL ALL" mode after all Program A stations
have run.
NEXT
.
MANUAL
.

2/16/07 2:07:21 PM
Tabla de contenido

Solución de problemas

loading

Tabla de contenido