Glossary Of Terms - Orbit ST2-RF Manual Del Usuario

Section 8:

Glossary of Terms

TERM
Cycle Start Time
Master Valve
Multiple Start Times
Program (A or B)
Rain Delay
Solenoid
Sprinkler Timer
Stacking
Station (Watering Station)
Terminal
Watering Program
Watering Restrictions
Watering Valve
(Irrigation Valve)
Zones
Determine a Watering Plan
Your timer has two programs: Program A and Program B. The
dual program capability allows you to assign certain water-
ing stations to Program A and others to Program B. There are
various reasons why you would want to do so. For example,
you might want to assign the stations that water the garden and
flower beds to Program A and those that water the lawn areas
of your yard to Program B. That way, you can set Program A to
water the garden beds every day, and set Program B to water the
lawn every second or third day.
16
07WTM002598 57926-24 rA.indd 16
DEFINITION
The time the program begins watering the cycle
A valve that prohibits water from reaching station valves
A feature that allows a program to be operated multiple times on the same day
A schedule for a group of stations that determines the date and time for watering
A feature that prevents the sprinkler timer from running it's scheduled watering program for a specific duration
The electrical part on a sprinkler (irrigation) valve that opens and closes the valve
A device that is responsible for turning an automatic irrigation system on and off
When a start time is scheduled to begin before the previous cycle has completed
An area where the watering (irrigation) is all controlled by a single control valve
The connection point on the docking port where a wire is inserted
See "Program (A or B)"
Specific days and/or times that local municipalities prohibit watering
Used in conjunction with sprinkler timers – a convenient way to deliver water to lawns, plants and gardens
See "Station (Watering Station)"
Your timer allows you to set up to six different watering cycle
start times for Program A or Program B. You cannot set a cycle
start time for each station. Stations can be assigned to either
Program A or Program B. Stations assigned to a program will turn
on sequentially according to the cycle start times assigned.
To help you visualize how best to program your timer, it might
be helpful to make a watering plan on paper. This will help you
establish the days, times and durations to water each station.
2/16/07 2:07:25 PM