AVM FRITZ!WLAN Repeater DVB-C Instalación Y Operación página 5

Connecting the FRITZ!WLAN Repeater DVB-C via Wireless LAN
Requirements (preconfi gured in and fulfi lled by a FRITZ!Box)
• Wireless access point that supports WPS with the WPA or WPA2 encryption stan-
dard
• The SSID (name of the wireless radio network) is set to "visible" in the wireless
access point, and the MAC address fi lter is disabled for the initial confi guration.
1. Insert the FRITZ!WLAN Repeater DVB-C in an outlet in the vicinity of your wireless
access point (for instance, a FRITZ!Box).
2. Press the "WPS" button on the FRITZ!WLAN Repeater DVB-C. The "WLAN" LED
starts to fl ash.
3. Within two minutes, press the button on your wireless access point that initiates
WPS. For more information, see the documentation of this device.
4. The FRITZ!WLAN Repeater DVB-C adopts the SSID (radio network name) and the
network key from your wireless access point and establishes a secure wireless
connection. Once the connection has been established,the "Power", "WLAN" and
" " LEDs light up.
5. Insert the FRITZ!WLAN Repeater in an outlet located about halfway between
your wireless access point and the wireless devices to be added to the wireless
network.
The FRITZ!WLAN Repeater DVB-C is connected with your home network by wireless
LAN. Check the settings and perform an update if necessary. For more information,
continue reading from page 10.
8
1
2
Power
WLAN
TV
4
3
WiFi
9